It could be defined as a vibratory phenomenon propagated in an elastic medium (ceilings, walls, floors and the air itself) causing perturbations in it.

To isolate any premises or venue properly, the first step is to identify the composition and the values of the noise (spectrum of frequencies, noise level etc.).

Once we know the magnitude of the noise or the vibrations to be insulated, we must build an unconnected off-the-floor frame which gives us the insulating and dampening values we need. Commonly called a “Room within a room”, totally dissociated from the existing structures.

 Ceiling Hangers / Mounts

• Akustik Range – for loads from 8 to 60Kg

Range designed for suspension of false acoustic ceilings and machinery operating at more than 1000 r.p.m. The same vibration damping element which is used throughout the Akustik range is made of rubber of high mechanical performance; it is specially designed for vibration damping. The metallic structure is designed to resist loads up to 650kg. It is supplied with an anti-corrosive zinc-plated coat.

AKUSTIK 1 Fitted directly to ceiling using two holes.

AKUSTIK 4 Fitted to ceiling using an M-6 rod

• Gran Akustik Range – for loads from 60 to 150 Kg

Range designed for suspension of false acoustic ceilings and machinery operating at more than 1000 r.p.m.  The same anti-vibration element is used for all the range.  This element is made of rubber offering high mechanical performance and it is specially studied for vibratory insulation.  The metallic structure is designed to resist loads up to 1000Kg.  It is supplied with an anti-corrosive zinc-plated coat.

• Springtec Range – for loads from 5Kg up to 350Kg 

Range designed for suspensions of false acoustic ceilings and machinery working at more than 450 r.p.m. and for loads from 5Kg up to 350Kg and with natural frequency as low as 3 Hz.

Manufactured with piano tail quality spring of great mechanical resistance guided by two rubber plates with integral end stops to prevent contact between spirals when overloading.

 Wall Mounts   

  Range designed for floating suspension of soundproof walls.

E.P. 400	E.P. 200	E.P. 300
This mount is designed to be screwed to the profile, with the possibility of choosing different distances thanks to its 3 holes. The anchoring in to the wall is made by 2 fixing flanges.	Mount designed for vibration damping of walls, equipped with flanges for fitting onto concrete. Maximum load per damper 10 Kg.	Mount designed for vibration damping of walls, equipped with flange and angle for fitting onto concrete and threaded. Maximum load per damper 10 Kg.

Special Elastic Mounts with Sylomer For Suspended Ceilings & Walls

Akustik + Sylomer is the trademark of a new solution for the anti-vibration mountings of false ceilings or vibrating elements that have to be suspended. They are sued for the attenuation of vibrations, reducing structure-borne noise.

The Akustik + Sylomer® ceiling mounts are made of Sylomer®, a microcellular polyurethane material specially conceived for vibration isolation. This material produces a higher degree of damping than the elastomers traditionally used for this purpose.

Natural frequency of the Akustik + Sylomer® mounts:

The Akustik + Sylomer® ceiling mounts can obtain very low natural frequencies of up to 7Hz at the optimal loading point. At this loading point the decoupling frequency on the Akustik + Sylomer® mounts is 9,9Hz.

Such a low natural frequency is optimal for the false ceilings of soundproofed premises. This type of suspensions is also particularly interesting for the isolation of machines or vibrating elements that work at more than 600 rpm.

Examples are:

o Ducts / pipelines:
- Of cooling liquids from refrigerating compressors, and are ideal for use in supermarkets, the frozen food section.
- Air conditioning
- Pumping of water
- From fume exhausts

o Suspension of air conditioning machinery
o Suspension of vibrating elements in general.